● 본 제품은 교환 및 환불, A/S, 기술문의가 불가능한 상품입니다.

	Description
	The ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. The ST-LINK/V2-ISOL provides one connector for the STM8 SWIM, STM32 JTAG/SWD and SWV interfaces.  The ST-LINK/V2-ISOL is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments
	Features
	5 V power supplied by a USB connector USB 2.0 full speed compatible interface USB standard A to mini B cable SWIM specific features ? 1.65 V to 5.5 V application voltage supported on SWIM interface ? SWIM low-speed and high-speed modes supported ? SWIM programming-speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed ? SWIM cable for connection to the application via an ERNI standard vertical (ref:284697 or 214017) or horizontal (ref: 214012) connector ? SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector JTAG/serial wire debugging (SWD) specific features ? 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs ? JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector ? Supports JTAG communication ? Supports serial wire debug (SWD) and serial wire viewer (SWV) communication Direct firmware update feature supported (DFU) Status LED which blinks during communication with the PC 1000 VRMS high isolation voltage (ST-LINK/V2-ISOL only) Operating temperature 0 to 50 °C
	<박스 포장 및 내용물 >